5.0

ESP32-C3FN4 MS11SF11

$3.00

MS11SF1 module is an Wi-Fi 4 & BLE 5.0 Module based on ESP32-C3FN4. It features an RISC-V 32-bit single-core processor with an operating frequency of up to 160MHz. The MS11SF1 supports development using AT commands, sending AT commands through the serial port to configure Wi-Fi and BLE to achieve the pass-through function. Besides, you can develop your own firmware by using the ESP-IDF development framework.

The MS11SF1 comes with 22 GPIO pins and integrate a rich set of peripherals including UART, SPI, I2C, I2S, ADC, TWAI (compatible with ISO 11898-1 protocol), LED PWM controller, USB (compatible with 2.0 full speed standard), JTAG controller, temperature sensor, RMT (infrared remote control), and etc.

Stock
in stock, 1000 units
Quantity:
Weight 0.001 kg
  • Description
  • Specifications

Product Characteristics:
1. 4M Flash/400 KB RAM
2. SoC TX power: BLE: -27dBm to +18dBm; Wi-Fi: 10 to 20dBm
3. Support for 2.4G Wi-Fi4 (IEEE802.11 b/g/n), backward compatible.
4. Support for AP, STA, AP+STA modes.
5. BLE 5.0, BLE Mesh.
6. Support for AT, ESP-IDF development.
7. Support for AP mapping, Smart Config mapping, BluFi mapping.
8. Support for OTA upgrade.

Product Variants: MS11SF11
PCB Antenna
Chip Inside: ESP32-C3FN4
SoC TX power: BLE: -27dBm to +18dBm; Wi-Fi: 10 to 20dBm
Supply voltage: 3V to 3.6 V
GPIO: 22
Receiving sensitivity: 1Mbps:-96dBm
Firmware: support AT command
Size [mm]: 16.6*13.2*2.2
Operating temperature: -40℃ to +85℃

Reviews

icon_star icon_star icon_star icon_star icon_star

5.0

icon_star icon_star icon_star icon_star icon_star

5.0

Be the first to leave a review.

Only logged in customers who have purchased this product may leave a review.

Fast delivery

Fast delivery

We deliver in 48 hours max!
Satisfied or refunded

Satisfied or refunded

Free returns within 14 days
We are available 24/7

We are available 24/7

Contact us by chat, mail, phone
100% Secure payments

100% Secure payments

Visa, Mastercard,Amex, PayPal
icon_side_contact
icon_up